XIGMATEK Elysium Super Tower Chassis

XIGMATEK Elysium Super Tower Chassis

By Admin 19 October 2011 0 comments
  • XIGMATEK Elysium Super Tower Chassis

ELYSIUM - your new high end gaming tower. Spotlighting your hardware with 12*5.25” drive bays and two 4 in 3 HDD cages. Supporting extreme HPTX, XL-ATX, and downward form factors. Aluminum and mesh front design with USB 3.0 and Hot-Swap HDD docking on the top panel. Two mounting possibilities for PSU’on the top and bottom, and water cooling experts and enthusiasts will be overwhelmed with their radiators up to 420mm including seven spots for the tube guidance.

XIGMATEK Elysium Super Tower Chassis screenshot 1


Overview of XIGMATEK Elysium Super Tower Chassis
  • Support extreme gaming HPTX motherboard and 10 PCI slots for 4-way SLI.
  • Two super speed USB3.0 ports and 2.5/3.5” HDD hot-swappable docking on the top panel.
  • 360/420mm radiator and max. four 20cm cooling fans available for optimized ventilation system.


Features of XIGMATEK Elysium Super Tower Chassis
XIGMATEK Elysium Super Tower Chassis screenshot 2
  • Support HPTX super big M/B and 10 PCI slots for four graphic cards.
  • Hot-swappable 2.5/3.5” SATA HDD docking on top panel.
  • Two USB3.0 super-speed ports on top panel with dust-proof cover.
  • Both side screw-less ODD holders.
  • Dual PSU possible on the top and bottom.
  • 360/420mm water cooling radiator possible.
  • Fully external twelve 5.25” bays with two “4 in 3 HDD cage”.
  • 3.5” HDD anti-vibration rubbers inside of 4 in 3 cages.
  • Anti-vibration rubbers and bottom dust filter for PSU.
  • Aluminum on the front mesh panel with removable dust filters.


Specifications of XIGMATEK Elysium Super Tower Chassis

Product Name ELYSIUM
Product Number CCC-HSA0DS-U01~04
Dimension (W)230 x (H)618 x (D)663 mm (9.06*24.33*26.10 inches)
Drive Bay 5.25" External x 12 with tool-free holders.
(Including two external 3.5" device adapter and one 4 in 3 3.5" HDD adapter.)
Expansion Slot 10 slots, 440mm free add-on card length.
Motherboard Support HPTX, XL-ATX, E-ATX, ATX, Micro ATX, ITX (with backside hole for CPU cooler)
Power Supply Standard P/S2 ATX/EPS power supply unit
1. Two PSU space on the top and bottom.
2. Intake airflow hole with dust filter.
3. Available for face upward and downward installation.
4. Within anti-vibration rubber.
Cooling System Air-cooling
Front Fan : Pre-installed 120mm white LED with black blades x 2
                    (On the 4 in 3 HDD cages.)
Rear Fan : Pre-installed 140mm white LED with black blades x 1
                    (120mm fan is available)
Side Fan : Pre-installed 200mm white LED with black blades x 1
CPU Fan : 80/120mm fan x 1 available
Bottom Fan :
轩 *If PSU was installed on bottom space: 120/140mm fan x2 or 200mm fan x 1
轩 **If PSU was installed on top space: 120/140mm fan x3 or 200mm fan x 2
Top Fan :
轩 *If PSU was installed on bottom space: 120/140mm fan x3 or 200mm fan x 2
轩 **If PSU was installed on top space: 120/140mm fan x2 or 200mm fan x 1
The clearance of CPU cooler height is 185mm without side panel preinstalled 23cm fan interference.
The clearance of CPU cooler height is 155mm with side panel preinstalled 23cm fan interference.
Side panel 23cm fan is removable to top and bottom fan space If interference.
Water-cooling
Water pipe holes x 7 (with rubber cover)
Available for 360/420mm radiator
I/O Panel Top Panel: Power On/Off switch, USB3.0 x 2, USB2.0 x 2, e-SATA x 1,
Audio in/out x 1 (HD Audio).



Model Name: Elysium
Part Number: CCC-HSA0DS-XXX

XIGMATEK Elysium Super Tower Chassis screenshot 3



Data taken from http://www.xigmatek.com/product.php?productid=122 Share this post on XIGMATEK Elysium Super Tower Chassis

Related posts

0 comments for XIGMATEK Elysium Super Tower Chassis

Leave a reply